Titan Mobile Welding Orlando has served Orlando since 2016, providing on-site welding and fabrication for homeowners, contractors, and businesses. We specialize in structural steel repair, trailer welding and reinforcement, custom gate and fence fabrication, aluminum repairs, and stainless TIG work. Every job starts with a free written estimate, proper surface prep and fit-up, and a finish you can rely on.
Titan Mobile Welding Orlando brings a fully equipped welding rig to your site for repair, reinforcement, and custom fabrication on carbon steel, stainless, and aluminum. Common work includes 2x2 and 3x3 tube gates, 1-4 inch plate brackets, trailer tongues and crossmembers, and stair and railing fixes.
We match the process to the job, MIG (GMAW) for production steel work, stick (SMAW) for outdoor repairs, and TIG (GTAW) for stainless and aluminum where control matters. Expect correct joint prep (bevels, root gap, clean base metal), sound tacks, and weld sequencing that reduces warping on long frames.
Outdoor steel fails fast when moisture sits in seams, hinge pockets, and unsealed tube ends. We address the cause, not just the crack, by adding gussets, doubling hinge plates, drilling crack-stop holes when appropriate, and sealing open tube ends to limit internal rust.
Finishing is planned upfront, not rushed at the end. For exterior projects we can prep to bare metal where needed, then recommend zinc-rich primer or epoxy primer plus a quality topcoat, along with stainless or hot-dipped hardware when the application calls for it.
Our Services
Aluminum cracks and broken brackets get worse fast, especially on gates, trailers, marine parts, and equipment frames. Titan Mobile Welding Orlando brings mobile aluminum welding to your site in Orlando with clean, controlled TIG and spool-gun MIG repairs that fit and function like the original part.
Learn More
Need clean stainless repairs done on-site without hauling equipment across town? Titan Mobile Welding Orlando has served Orlando since 2016, providing mobile stainless steel welding for railings, gates, piping, food-service equipment frames, and structural stainless repairs with shop-grade processes.
Learn More
Exhaust leaks, cracked welds, and broken hangers usually come down to thin, heat-cycled steel that needs clean, controlled exhaust welding. Titan Mobile Welding Orlando has served Orlando since 2016, bringing mobile TIG and MIG welding to your driveway, shop, or jobsite for practical repairs that seal, support, and last.
Learn More
When a gate sags, binds, or won’t latch, the real fix is usually in the hinge barrels, posts, and welds, not the latch bolt. Titan Mobile Welding Orlando has served Orlando since 2016, providing on-site gate welding repair for steel and wrought iron swing and sliding gates.
Learn More
When a trailer breaks, downtime gets expensive fast. Titan Mobile Welding Orlando has served Orlando since 2016 with on-site trailer welding for utility, landscape, cargo, equipment, and boat trailers, so you do not have to tow it to a shop.
Learn More
Loose entry steps, cracked bumpers, and frame crossmember damage can turn one trip into a safety problem fast. Titan Mobile Welding Orlando has served Orlando since 2016 with on-site RV welding repair for frames, steps, bumpers, hitches, and cargo racks, so you are not towing to a shop.
Learn MoreShare a few pictures, measurements, and your timeline. We’ll confirm material type (steel, aluminum, stainless) and whether the work is repair, reinforcement, or new fabrication.
We inspect access, power needs, and load paths, then provide a free written estimate. If parts are needed, we confirm steel sizes, plate thickness, and hardware before starting.
We prep, tack, weld, and verify alignment and operation (gate swing, latch fit, trailer coupler height). Cleanup and a quick walkthrough come standard so you know what was done and why.
Why Orlando Chooses Us
Experienced, licensed mobile welding contractors delivering durable results for every home and business across Orlando.
Licensed and insured mobile welding contractor with the tools to work safely on residential and commercial sites. We can weld carbon steel, stainless, and aluminum using MIG, TIG, and stick as the application requires.
Clean metal prep (grind, bevel, de-rust), tight fit-up, and controlled heat input for strong welds and better-looking finishes. We handle crack stops, gussets, fishplates, and proper weld sequencing to reduce distortion.
You get a written scope with materials, thickness, and connection details so there are no surprises. We recommend practical options like reinforcing plates, new hinges/latches, or bolt-on brackets when it saves time and cost.
Titan Mobile Welding Orlando serves Orlando and 8 surrounding communities including Edgewood, Belle Isle, Maitland. We typically respond to new project requests within one business day and can often schedule estimates the same week.
Titan Mobile Welding Orlando focuses on practical, durable metalwork: repairing what can be saved, reinforcing what carries load, and fabricating what needs to fit correctly the first time. Expect straightforward recommendations on joint design, weld process selection (MIG, TIG, stick), and finish options like primer and topcoat.
We work with common structural shapes and plate, including angle, channel, tube, and I-beam components. Typical projects include cracked weld repairs, hinge and latch replacements, added gussets, trailer frame reinforcement, and fabricated brackets for equipment and enclosures.
Orlando area heat, humidity, and frequent rain accelerate corrosion, especially on outdoor steel gates, railings, and trailers. We plan for it with proper cleaning, rust removal, and weld prep, then recommend coatings and hardware that last longer outside.
For exterior work, we often discuss options like zinc-rich primer, epoxy primer, and quality enamel topcoats, along with stainless fasteners where appropriate. When galvanizing is present, we address coating removal and ventilation needs before welding, then talk through touch-up and protection after the repair.
Homeowners call us for driveway gates, fence panels, handrails, guardrails, stair repairs, pool screen framing repairs (where metalwork is needed), and custom brackets or supports. We can square and re-hang sagging gates, replace worn hinges, repair latch posts, and add reinforcement so doors and panels operate smoothly.
Businesses and contractors use us for trailer repairs, equipment modifications, structural steel fixes, bollard and barrier repairs, dumpster enclosure repairs, and on-site fabrication. If you have a time-sensitive breakdown, mobile welding reduces downtime by keeping the asset in place while we repair it.
We serve customers throughout Orlando and surrounding Central Florida communities with mobile, on-site welding. Common call areas include Winter Park, Maitland, Altamonte Springs, Casselberry, Oviedo, Winter Springs, Apopka, Ocoee, Winter Garden, Clermont, Kissimmee, St. Cloud, Sanford, Lake Mary, Longwood, and nearby job sites.
If you are unsure whether your location is in range, call with your address and a brief description of the work. We will confirm scheduling, access requirements, and whether an on-site visit or photo-based estimate makes the most sense.
It depends on the metal and the conditions. MIG is efficient for most carbon steel fabrication and repairs, stick is reliable outdoors and on less-than-perfect steel, and TIG is preferred for stainless and aluminum when appearance and control matter.
If the metal is thin, rusted through, or the joint design is weak (small welds on a high-load hinge area), a simple reweld can fail again. Adding gussets, thicker hinge plates, or a new post base often fixes the root cause.
For gates and frames, share opening width and height, approximate tube size (for example 2x2 square tube), hinge type, and where it binds or sags. For trailers, have axle count, tongue length, coupler size, and where cracks or bends are located.
Yes, but the zinc coating must be handled correctly. We remove coating in the weld zone, use proper ventilation and PPE, and then discuss corrosion protection after welding, such as cold galvanizing compound or primer and paint.
Yes. Aluminum needs clean, oxide-free surfaces and correct filler selection, typically done with TIG or aluminum-capable MIG. Contamination is the main reason aluminum welds look rough or crack later, so prep is critical.
Heat and sparks can damage surrounding surfaces if not protected. We use fire blankets, shields, controlled grinding, and careful positioning, and we will tell you ahead of time if a section should be removed or masked to prevent damage.
Yes. We provide a free written estimate with the scope, materials, and what is included for welding, reinforcement, and finishing.
Often, yes. Many mobile setups can run independently; if shore power is needed for a specific job, we will confirm requirements during scheduling.
We commonly weld carbon steel, stainless steel, and aluminum, selecting MIG, TIG, or stick based on thickness, access, and service conditions.
Yes, for many field repairs and reinforcements such as cracked members, damaged connections, added plates, and fabricated brackets. We evaluate access, load paths, and safe repair options before welding.
Scheduling depends on job size and parts availability. Call with photos and a brief description and we will offer the next available window and any same-week options.
If you're planning a mobile welding project in Orlando, working with a dependable local contractor makes all the difference. We provide residential and commercial mobile welding services focused on proper preparation, clear communication, and long-term performance. Whether you need a new installation or repairs to existing mobile welding, our team is ready to help. Each project is evaluated based on site conditions, usage needs, and local requirements to ensure dependable results. If you're ready to discuss your project or need more information, reach out today and speak directly with our team.
