Commercial · Orlando, FL
Loose treads, cracked stringers, and shaky handrails are jobsite hazards, and they usually start as small weld failures. Titan Mobile Welding Orlando has served Orlando since 2016, providing mobile platform welding repair for industrial stairs, ladders, catwalks, and mezzanine access where downtime is expensive.
Every platform welding repair starts with safe access and solid prep. We isolate the area, check load paths, and inspect stringers, tread pans, landing frames, toe boards, and guardrail posts for cracked weld toes, corrosion, and heat-affected soft spots. Failed welds are cut out, edges are cleaned to bright metal, and joints are fit for proper root opening and alignment so the repair is structural, not just cosmetic. Depending on the assembly, we weld carbon steel, stainless steel, and aluminum using SMAW (stick), GMAW (MIG), or GTAW (TIG), and we match filler metal and joint design to the base material and thickness.
Florida humidity, coastal salt carried inland, fertilizer dust, and wash-down chemicals accelerate corrosion at welds and around fasteners, especially on expanded metal and bar grating. After welding, we manage distortion, recheck plumb and level, and restore edges that can snag boots or PPE. Finish options include grinding and blending, touch-up primer and industrial enamel, and coordination for galvanizing repair (zinc-rich coating) when the original assembly was hot-dip galvanized. If a tread, nosing, or grating panel is too thin to repair safely, we can replace sections with new bar grating, expanded metal, checker plate, or formed tread pans sized to the existing supports.
Orlando facilities choose us because we show up with a fully equipped mobile rig and focus on safety-critical details. You get a welder who can handle field conditions, tight access, and mixed materials while keeping guardrails, ladder cages, and landings in code-ready shape. We document what failed, what we repaired, and what should be monitored next, which helps maintenance teams plan shutdown work. Licensed and insured service, clear communication, and a written estimate keep your project moving without surprises.
Before we pack up, we do a walkthrough with your supervisor or maintenance lead. We verify weld continuity, check fastener torque or replacements where applicable, confirm rail height and mid-rail continuity, and make sure tread surfaces are secure and free of sharp edges. You receive a written scope of work, material notes, and photos on request, plus recommendations for follow-up items like corrosion control, tread replacement, or rail reinforcement. If you need after-hours or phased repairs to keep access open, we will schedule the work around your operation.
Yes. We provide a free written estimate with the scope, materials, and what is included for welding, reinforcement, and finishing.
Often, yes. Many mobile setups can run independently; if shore power is needed for a specific job, we will confirm requirements during scheduling.
We commonly weld carbon steel, stainless steel, and aluminum, selecting MIG, TIG, or stick based on thickness, access, and service conditions.
Yes, for many field repairs and reinforcements such as cracked members, damaged connections, added plates, and fabricated brackets. We evaluate access, load paths, and safe repair options before welding.
Scheduling depends on job size and parts availability. Call with photos and a brief description and we will offer the next available window and any same-week options.
Platform welding repair is not a patch job when people are walking, climbing, and carrying tools over the structure every day. Industrial stairs, fixed ladders, catwalks, and mezzanine landings see constant vibration and point loads, so small cracks at a rail post or tread support can spread fast. Titan Mobile Welding Orlando performs on-site welding repair and selective replacement for access systems made from carbon steel, stainless steel, or aluminum, with practical options for corrosion protection and minimal downtime.
Common calls we see include cracked welds at handrail posts, broken tread pan corners, loose ladder rungs, and grating frames that have rusted through at the supports. We start with an inspection of the assembly, then remove failed weld metal, prep the joint, and re-weld with the right process for the thickness and access. For structural members, we can add gussets, fishplates, or reinforcement angles when the design needs more section strength, and we can rework misaligned rails or platforms so everything sits square and stable.
Because so many access systems in Central Florida are galvanized or painted, we plan for coating disruption. After the weld repair, we can grind and dress edges where appropriate, then apply primer and industrial topcoat or specify zinc-rich touch-up to protect the repaired area. When a component has widespread thinning, we will recommend replacing the tread, rung, or grating panel instead of chasing weak metal, and we can fabricate replacement sections from bar grating, expanded metal, or checker plate to match the existing layout.
If you need platform welding repair in Orlando, our goal is to make the access system safe to use again and easier to maintain. Expect a clear written estimate, a work plan that fits your operating hours, and a final walkthrough that confirms the repair is secure, clean, and ready for service.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Orlando. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
